Fully Tested
Part Number: 57110-TA1-A11 (TA1A1)
Also Replaces: 57110-TA1-A12 | 57110-TA1-305 | 57110-TA1-306 | 57110-TA1-415 | 57110-TA1-416 | 57110-TA1-A03 | 57110-TA1-A04 | 57110-TA1-A05 | 8C07A-0439-TA1A0 | 7T20A-0796-TA1A0 | 0B11E-0386-E0VAA | H2B2D110680 | 5L06D-0583
(Please verify your physical part number matches the "TA1A1" suffix printed in red on your module label)
Compatibility & Fitment
This unit is a direct replacement for the following vehicles equipped with matching part numbers:
Honda Accord (Sedan): 2008, 2009, 2010, 2011, 2012
Fits Models: All trims — 3.5L V6 engine — automatic transmission — sedan body style — US market
Does NOT fit: 2008-2012 Accord with 2.4L 4 cylinder engine — that engine uses the TA0 series module which has a different part number and calibration
Interchange Part Numbers: 57110-TA1-A11 | 57110-TA1-A12 | 57110-TA1-305 | 57110-TA1-306 | 57110-TA1-415 | 57110-TA1-416 | 57110-TA1-A03 | 57110-TA1-A04 | 57110-TA1-A05 | 8C07A-0439-TA1A0 | 7T20A-0796-TA1A0 | H2B2D110680 | 5L06D-0583 | 2D11D-0338
If your module label shows TA1A1 or TA1A0 this unit will work. If your Accord has the 2.4L 4 cylinder engine your module will show a TA0 series code — please see our separate TA0 listing for that variant.
Critical Installation Notes
Engine Size Critical — V6 and 4 Cylinder Are Not Interchangeable: The TA1 series module is calibrated specifically for the 3.5L V6 Accord. The 2008-2012 Accord was sold with both the 2.4L K24 4 cylinder and the 3.5L J35 V6. These two engines use different VSA modules with different internal calibration. The 4 cylinder uses TA0 series numbers. Installing a TA1 V6 module in a 4 cylinder Accord or vice versa will result in persistent VSA warning lights and incorrect brake behavior. Always verify your engine size before ordering.
Calibration Required: You must perform a VSA Sensor Neutral Position Memorization — Steering Angle and G-Sensor calibration — using a professional scan tool such as Autel, Snap-On, or Honda HDS after installation. This clears VSA and Hill Start Assist warning lights. This step cannot be skipped.
System Bleed Required: A standard brake bleed is required after installation. We highly recommend an ABS Modulator Bleed via scan tool to purge all air from the internal valves and ensure a firm pedal feel.
Contact Prong Warning: There are two metal contact prongs connecting the VSA modulator to the hydraulic pump. These prongs must remain on the pump side before reconnecting the module. If reconnected with the prongs misaligned they will bend and contact each other creating an electrical short that will destroy the module. Inspect the pump contact points carefully before installation. This damage is not covered under warranty.
Common Fault Codes This Repair Resolves:
DTC 31-11 through 38-11 — ABS Solenoid Valve Malfunction
DTC 66-11 — Pressure Sensor Circuit Malfunction
DTC 66-13 — Pressure Sensor Malfunction
DTC 81-19 — Yaw Rate Sensor Internal Malfunction
DTC 121-11 through 124-11 — VSA Solenoid Valve Malfunction
DTC 85-01 — VSA System Malfunction
U0121 — Lost Communication with ABS Control Module
Bench Tested: This unit has been verified on a dedicated test bench under stabilized 12V 30A power supply. We confirm the pump motor spins smoothly, all solenoids fire correctly, and no internal control module faults or low voltage codes are present prior to shipping.
Why Buy From Us?
Same-Day Shipping: Orders placed before 2:00 PM CST ship today via USPS Priority or FedEx.
120-Day Exchange Warranty: If the part fails within 120 days we send a replacement immediately — no questions asked.
Professional Grade Testing: We use stabilized power supplies and dedicated bench test equipment to verify every module before it ships. This eliminates the common internal control module faults and low voltage errors frequently found in untested high-mileage units pulled from salvage yards.